Highlights
Ideal solution for small farms and special applications SuperFlow spreading system Easy setting of the application rate A wide variety of spreading spouts Uniform spreading pattern via the PS-ED IIDescription
With the PS403 hopper capacities of 400l and 500l this spreader is the ideal solution for smaller specialised farms and special municipality applications, like sand and salt spreading or golf courses, sport fields etc. Spreading quality and ease of operation of this machine are unequalled – now like in the past. The pendulum spreader is as standard delivered with the nylon spreading spout for 9-15 metre working width. Flexibility of this spreader is based on the variety of spouts for different applications and spreading widths, which make it possible to spread fertiliser, seeds, sand, salt, pellets or any other granular/powder products on range of spreading width from 1 - 15m.
Features
- The SuperFlow spreading system gives you maximum accuracy in fertiliser application.
- The spreading quality and ease of operation of this unique machine are unequalled - now as in the past.
- The pendulum movement of the spout ensures that the application rate is always identical on both sides. This results in a symmetric spreading pattern and an excellent overlap.
- Accurate spreading, also on slopes.
- The to-and-for movement of the spreading spout causes the fertiliser to be thrown to the left- and right-hand side only, never to the front and a short distance only to the rear. Wind influence is therefore insignificant, and the tractor does not get covered with fertiliser.
- The bearings of the spreading unit have easily accessible grease nipples for maximum ease of maintenance.
- All SuperFlow pendulum spreaders can be controlled either manually or hydraulically.
- The plastic scale on the spreading unit allows continuous adjustment of the application rate in kg per hectare, so the risk of spreading errors is minimal.
- Using the spreading table and the dial you can determine the desired quantity of fertiliser for every spreading width and forward speed.
- With the optional available adjustment key, you can easily adjust your spreading width (angle of the spreading spout will change). Ideal for sand spreading or in orchards!
- Direct access to the most recent test results at www.viconspreadingcharts.com or download the Spreading Charts Application via or App Store or get it on Google Play
Vicon offers you a wide range of spreading spouts for a wide variety of applications.
- Long spreading spout: used for normal spreading widths 9 - 14m.
- Short spreading spout: used for small spreading widths, spreading width 4 - 8m.
- Band spreading spout: for spreading in orchards, vineyard spreading width 2 - 8m (long) or for pesticides, spreading widths 0.75 - 4.50m (short).
- Sand, salt and grid spreading spout: used for road construction and combatting icy conditions, spreading widths 6-12m (long), 5 - 6m (medium) or 2 - 4m (short) are possible.
- Boundary spreading spout: prevents fertiliser from spreading into ditches or hedges or ditches, spreading width 2-6m.
- Right side spreading spout: for fish-farms and spreading on dikes, spreading width 4 - 6m.
- Tramline cylinder: using the tramline cylinder the spreader is inclined, allowing spreading up to the border of the field. You just tilt the spreader 7° if you have to operate near fences or ditches.
- The PS-ED II on-board computer allows the metering disc to be adjusted from the tractor cab and fits to all Vicon pendulum spreaders.
- Forward speed is continuously checked by a wheel sensor or by radar and transmitted to the PS-ED II system which in turn ensures a constant application rate whatever the forward speed. The consequence is an absolutely uniform spreading pattern in the direction of travel. The quantity can be increased or decreased at any time during work.
- Operators will find the PS-ED II exceptionally easy to operate. All you have to watch over is a control panel with its clearly understandable display.
- To increase the hopper capacity of the basic pendulum spreaders there are different hopper capacities available: 100, 110, 200, 400, 600 and 900 litres, depending per model.
- A hopper cover protects the fertiliser from moisture and dirt. For filling the hopper, the cover can be easily folded.
- For all PS spreaders there is an optional lighting set available. Also, reflector decals can be ordered for safe transport on the roads.
- A calibration container allows calibration tests to be performed with spout in place.
- The agitator ensures an even material feed to the spreading unit. A safety grid protects the agitator.
- The set of pivoting wheels allows the spreader to be easily moved when detached from the tractor.
- The fine seed insert shuts two of the three openings of the metering device for the application of small quantities of fine seed.
- A stainless-steel insert for the hopper is needed when spreading sand or salt.
Vicon Spreader Competence Centre
The Vicon RotaFlow disc spreaders are known worldwide for their reliability, ease of operation and outstanding precision in all conditions. This is the result of many years of practical experience, research and testing. A fertiliser spreader can only be set accurately based on the physical properties of the fertiliser and using the corresponding settings provided by the manufacturer.
The Spreader Competence Centre is using the most modern technology available in hard and software, allowing the measurement of complete overlap patterns in 3D. Instead of only measuring the spreading pattern in one line corresponding to the working width, this technology creates a full pattern showing a complete 3D spreading profile of the fertiliser.
Get direct acces to the spreading charts
Exact advice for each Vicon spreader at any working width, application rate and driving speed. Direct access to most recent test results at: www.viconspreadingcharts.com
Or download the SpreadApp which is available on the App Store and Google Play
Technical specifications
Technical specifications
Download brochure| PS403 | |||
|---|---|---|---|
| Basic unit | PS403 | ||
| Hopper capacity (l) | 400 | 500 | |
| Hopper width (cm) | 145 | 145 | |
| Filling height (cm) | 89 | 101 | |
| Weight (kg) | 121 | 126 | |
| PTO speed (rpm) | 540 | 540 | |
| 3-point linkage category (CAT) | 1/2 | 1/2 | |
| Controls | Manual/Hydraulic/Electric | Manual/Hydraulic/Electric |
Technical specifications
Technical specifications
Download brochureSuperFlow |
PS403 |
PS503 |
Basic unit |
PS403 |
|
Hopper capacity (l) |
400 |
500 |
Hopper width (cm) |
145 |
145 |
Filling height (cm) |
89 |
101 |
Weight (kg) |
121 |
126 |
PTO speed (rpm) |
540 |
540 |
3-point linkage category |
1/2 |
1/2 |