Vicon Andex 1304 PRO

Andex 1304 as Pro Model with new functionalities

Heavy duty solution for efficient farmers

Whereas the Andex 1304 is already equipped with standard features like separate front and rear rotor lift, very simple electronic control, high performance oil bath gearbox and hydraulic adjustment of working and swath width on front and rear rotors, the Andex 1304 PRO is equipped with additional features making it even more efficient.

Isobus solution for professional users

The PRO version features advanced operation possibilities via to Isobus control. All machine functions - operated now on load sensing system - are then easily controlled from each Isobus ready Terminal like Isomatch Tellus or Isomatch Tellus Go. With that, users get advanced opportunities to adjust and operate the rake according to their needs.

New functions:

  • All 4 rotors can be lifted individually
  • Folding and unfolding by just pressing one button
  • Working width can be controlled from the terminal
  • Possibility to save the swath width
  • Different headland delay functions


Technical Specifications:

  Working Width Tine Arms Weight
Andex 1304 PRO 10.00-12.50m 4x12 4700kg

4m Transport Height

The Andex 1254 and 1304 (Pro) give no reason for wasting time, not even when moving between fields. Just raise the rotors and off you go, securely below 4m transport height. There is no need to leave the tractor to remove tines arms. Large transport wheels and hydraulic brakes are standard.


For storage all tines arms are detachable to allow a storage height as low as 3.40m. A strong and stable storage foot ensures fast and trouble-free coupling and uncoupling.

10-12.5m Working Width

The hydraulic adjustment of working and swath width allows you to customise swath intensity and width to the capacity of the following machine, conveniently handled and controlled from the tractor seat. Working width can be set between 10 and 12.50m and swath width can be adjusted between 1.20 and 2.20m, adding the necessary flexibility.

ISOBUS Control

  • The Andex 1304 PRO and the 1505 are fully Isobus compatible and available with the IsoMatch Tellus or Tellus GO control terminals.
  • The IsoMatch Tellus is the virtual terminal, offering 2 interface screens in 1 terminal. The large 12” easily programmable touch screen offers ergonomic use.
  • The IsoMatch Tellus GO is especially developed for controlling machines in a simple way. Just connect your machine, step into the tractor cab, switch on the power button and GO.

Headland Management

The Vicon rake models Andex 1254 and 1304 (Pro) come with enhanced headland management. In addition to high ground clearance of rotors during headland turns it is possible to tailor time delay between lifting/lowering the front and rear rotors to driving speed and field conditions. This is done mechanically in an easy and uncomplicated way.

Optional Electric Height Adjustment

  • Electric height adjustment possibility of all 4 Rotors
  • Possibility to save the position of the rotors to recall them later
  • Easy set up thanks to Isobus Control
  • All rotors are adjusted after each other, to secure that no failures due to power consumption can occur