Vicon RV 5116 - 5118

Variable Chamber Balers

The RV 5100 series is a step up in power and reliability, and has everything you need to get the job done. Includes the new and dependable PowerBind net and twine binding systems . The Vicon RV 5116 and 5118 are highly effective variable chamber balers developed for cost efficient and profitable baling. They are developed for simple operation and offer high capacity in silage, hay and straw. Both models offer a host of features including a bale chamber that can be set to operate with three different bale densities zones: soft or moderate cores.

The Advantages:

  • PowerBind with direct net injection for fast and highly reliable netting.
  • 2.0 or 2.2 m pick-up with small diameter pick-up reel for fast and efficient throughput.
  • Single or dual fork feeder or rotor intake systems.
  • PowerFeed rotor intake for impressive intake capacity.
  • Drop Floor for easy unblocking (standard on PowerFeed).
  • Optionally with 3 different bale densities, pre-selected from the tractor cab.
  • Easy and simple loading of net roll.
  • New simple and intuitive control with the Focus 3 terminal.

 

 Technical Specifications: 

  Bale Diameter Intake System Binding
RV 5116F 1.20 x 0.80 - 1.65m Single Fork Feeder Twine, net, double
RV 5116FD 1.20 x 0.80 - 1.65m Dual Fork Feeder Twine, net, double
RV 5116R 1.20 x 0.80 - 1.65m PowerFeed Rotor Twine, net, double
RV 5118F 1.20 x 0.80 - 1.80m Single Fork Feeder Twine, net, double
RV 5118FD 1.20 x 0.80 - 1.80m Dual Fork Feeder Twine, net, double
RV 5118R 1.20 x 0.80 - 1.80m PowerFeed Rotor Twine, net, double
VI_RV 5116 (23)
Video
Animation
Vicon RV 5116 - 5118
Vicon RV 5116 - 5118
Vicon RV 5116 - 5118
Vicon RV 5116 - 5118
Vicon RV 5116 - 5118
Vicon RV 5116 - 5118
Vicon RV 5116 - 5118
Vicon RV 5116 - 5118


PowerBind Net Wrap

  • One of the fastest net wrap actions available. This means minimum downtime and maximum time baling.
  • The net is fed directly into the bale chamber by an injection arm in a flat movement angle to keep the net tight at all times.
  • Accurate and extremely reliable net injection.
  • No interference from external factors such as wind and crop.
  • when the bale is 90% complete the injection arm moves forward, ready for the net injection. No time is spent picking up the net. In fact
  • Very low loading height, for maximum convenience and time saving. To replace the empty roll just swing out the shaft and replace it with a new roll
  • The PowerBind net wrap system allows the net to extend past the edge of the bale.
PowerBind Net Wrap system
PowerBind Net Wrap
PowerBind Net Wrap
PowerBind Net Wrap
PowerBind Net Wrap
PowerBind Net Wrap
PowerBind Net Wrap
PowerBind Net Wrap
PowerBind Net Wrap

The Bale Chamber Concept

  • The RV 5100 bale chamber offers a combination of 2 rollers and 5 wide laced belts.
  • This mixed chamber ensures a smooth bale start whatever the intake system, offering smooth bale rotation and reduced crop loss, even in dry conditions.
  • The two aggressive front rollers that come in contact with the crop are constantly cleaned by scraper rollers and are designed to perform well in all conditions. They ensure instant and efficient bale start with every type of crop.
  • The small pre-chamber at the start of the bale formation ensures well-shaped and dense bales with a moderate core and tight outer layers.
  • As the bale grows, the belt tensioning arm is subjected to steadily increasing resistance from two hydraulic cylinders and a spring tensioner.
  • So as the bale diameter grows, so does the bale’s density. The result is a very firm bale with a moderate core.
Bale chamber concept 5100&6600
The RV 5100 bale chamber concept
The RV 5100 bale chamber concept
The RV 5100 bale chamber concept
Diameter (D) and pressure (P) can be adjusted in three stages using the control terminal
Diameter (D) and pressure (P) can be adjusted in three stages using the control terminal
Diameter (D) and pressure (P) can be adjusted in three stages using the control terminal
The combination of 5 belts and front rollers provides dense bales with a soft core
The combination of 5 belts and front rollers provides dense bales with a soft core
The combination of 5 belts and front rollers provides dense bales with a soft core

Focus 3 Control Terminal

Kverneland Group Mechatronics has recently launched a new operator terminal, the Focus 3. This terminal is developed for specific implement types and will only be delivered as package for those implements, together with the electronics for balers. The terminal Focus 3 is positioned in the market as an economy solution.

  • The Focus 3 terminal is easy to learn and very intuitive, with focus on functionality and operating simplicity. The Focus 3 terminal is a universal control terminal which can also be used with other implements from Vicon Group.
  • The Focus 3 terminal gives you full control of all functions from the tractor cab. They are shown on a large and very clear digital display.The Focus 3 terminal monitors and controls all necessary functions with all relevant parameters / information visible at a glance. The control box is also driving the binding automatically without any intervention from the operator.
Focus 3

Pick-Up

  • 2.0 or 2.2m pick-up with small diameter pick-up reel for fast and efficient throughput.
  • Pick-up with 4 or 5 rows of tines respectively.
  • Twin cam tracks on the 2.2m wide pick-up.
  • Tine bars with two central supports on the 2.2m wide pick-up.
  • Small diameter pick-up design.
  • Roller crop press is standard on the 2.2m wide pick-up.
  • Narrow transport width.
VI_RV5116_005
Pick-Up
Pick-Up
Pick-Up
Pick-Up

Intake System

PowerFeed Rotor Intake

  • Truly impressive intake capacity can be achieved with the PowerFeed rotor intake system - handling all crop types with ease, whatever the conditions.
  • The PowerFeed rotor with its 13 rotor fi ngers proactively forces the material into the bale chamber for higher intake speed and capacity proving instant bale start

 

Single or Dual Fork Feeder

  • The fork feeder versions are fitted with a cost efficient fork feeder intake system. This system provides direct feed into the bale chamber, and the wide opening allows almost unrestricted intake capacity for fast and efficient bale start.
  • In addition the fork feeder gives less vibration and reduced power consumption.
  • The fork feeder is provided with a crop press above the pick-up that ensures a regular crop flow even from large bulky swaths.
  • Dual fork feeder with double feed tines ensures even higher capacity, while still safeguarding fragile crop types.
PowerFeed intake system
Fork Feeder
Fork Feeder
Fork Feeder
Fork Feeder
Fork Feeder
Fork Feeder

New Parallelogram DropFloor system for easy unblocking

Whichever rotor or pre-chopping intake system you choose, your Vicon baler comes equipped with the new Vicon Parallelogram drop floor system, which brings faster and easier clearing of blockages from the comfort of the tractor cab.This patented system not only lowers the rear edge of the drop floor as per traditional systems, but also provides additional space under the front section of the floor, where blockages is more likely to occur.

 

DropFloor


iM FARMING


IsoMatch Tellus

One terminal to control all ISOBUS machines

Using ISOBUS as the interface, the IsoMatch Tellus can communicate with all ISOBUS machines and is equipped to drive with GPS systems.
The easy-to-use touch screen is designed for long working days. You have an excellent view of the two screens, which allows you to follow the performance of both the implement and the tractor.

More about IsoMatch Tellus >

Tellus_field1_baler
IsoMatch Tellus
IsoMatch Tellus

IsoMatch Tellus GO

Work easy. Be in control.

Tellus GO is especially developed for controlling the machine in a simple way. The farmer is in full control of the machine in exactly the way he wants. Easy set up the machine with the soft keys via the 7-inch touch screen. And, optimal control while driving, just use the hard keys and rotary switch. Controlling the implement has never been so easy.

This can be you your first step into Precision Farming
IsoMatch Tellus GO makes it easy to control any ISOBUS machine from your tractor cab. IsoMatch GEOcontrol enables you to achieve higher yields, lower costs and do your work with less hassle. This licence key is divided in two parts, Section Control and Variable Rate Control, which are  available from the IsoMatch Shop. Now you can buy the specific functionality that you need.

More about IsoMatch Tellus GO >

TellusGO_field_Baler_closeup
IsoMatch Tellus GO
IsoMatch Tellus GO
IsoMatch Tellus GO
IsoMatch Tellus GO

IsoMatch InDemo

Our compact solution to demonstrate the compatibility of ISOBUS machines wherever you are

ISOBUS is all about compatibility. Whether you would like to show a customer your machines' compatibility to their ISOBUS tractor or demonstrate functionality on the IsoMatch Tellus, the IsoMatch InDemo is the perfect solution. The IsoMatch InDemo has won a silver medal of innovation at Agritechnica 2013.

Just plug and play
Plug the IsoMatch InDemo plug into the tractor's ISOBUS connector and you are ready. Every IsoMatch InDemo plug is programmed with a particular machine software. The virtual terminal functions as if the plug was a real machine. This compact solution is applicable to any ISOBUS tractor type.

More about IsoMatch InDemo >

IsoMatch-InDemo_500
IsoMatch InDemo
IsoMatch InDemo